This family inflatable swimming pool is made from independent stacked airbags rather than one big chamber, which is what makes it a safer backyard blow up pool for mixed ages. Each layer of the wall is sealed on its own, so a puncture in one ring does not take the whole pool down. Add the insulated foam floor and you have an above ground inflatable pool that works for a toddler splash session and an adult soak on the same afternoon.

How This Family Pool Is Built

• Layered Independent Airbags: High-strength hot carbon tough PVC with reinforced thermal fusion, so a leak in one layer does not affect the rest of the pool.
• Upgraded Leak-Proof Valves: Every airbag layer has its own highly sealed valve to prevent air escaping.
• Insulated Foam Bottom: A wear-resistant thermal insulation foam floor is comfortable underfoot with no bumps.
• For Kids and Adults: Deep enough for grown-ups to sit in, cushioned enough for small children to stand on.
• Warm Water Friendly: You can mix in warm water, provided the temperature stays below 50 C.

Specifications and Instructions

• High Quality Material: The high-strength hot carbon tough PVC layered independent airbag adopts reinforced thermal fusion technology, which is firm and not easy to break. If a single layer leaks, it will not affect the normal use of the surrounding baby.
• Upgraded air Leak-proof Valve: Each layer of airbag has an upgraded version of leak-proof valve, which is highly sealed to prevent air leakage.
• Comfortable to Use: The wear-resistant thermal insulation foam bottom is comfortable for pedaling without bump.
• Instructions for use:
  After unpacking, unfold it completely and lay it flat on a clean and smooth ground.
  From the bottom to the top, inflate layer by layer, inflate to 90% -95% saturation, and then press down to parallel to the body of the pool. After inflating for 8 hours, there is no air leakage, and then add cold water. Add hot water (after mixing with water). The temperature must not be higher than 50 C).
  After use, open the bottom drain plug. After the water is drained, place the swimming pool in the shade and dry it. Then open the vent valve, completely deflate and put it in a PE bag and place it in the shade.
  Packing List:
  Swimming Pool * 1
  Note:
  Please be careful not to use a knife or other sharp tools when unpacking. Do not inflate too much, because it is a plastic material, the principle of thermal expansion and contraction of rubber, inflatable products have their own extendibility, due to the size system, the difference between the inflation saturation and the measurement method. When you first receive the goods, the size will be small, there may be an error of about 5-10 cm (about 2-4 inches), and it will return to normal after you charge more times.
  The size measurement is: to measure from the position of the inflation nozzle

FAQ

Q: Is it suitable for adults?
A: Yes. The layered airbag walls and foam bottom are designed for kids and adults to use the same pool.

Q: How should I inflate it?
A: Inflate layer by layer from the bottom up to 90-95% saturation, then leave it 8 hours to check for leaks before adding water.